TBHB14
EN
2
Special Instructions for using the
blender
When the blender is not in use make sure that •
it is safely unplugged from the mains supply.
Always operate the blender with the blade •
immersed in suitable food and contained in a
suitable vessel. Ensure there is adequate room
in the vessel to avoid splashing the contents.
Do not fully immerse the blender wand.•
After each operation, allow the blender to •
cool for 3 minutes before using it again.
The blade on this blender is sharp. Treat it •
with care at all times and never allow ngers,
hair, or clothing to come into contact with the
blade.
If you wish to scrape the contents of a bowl •
with a spatula, remove the blender rst.
Do not process food containing hard objects •
which cannot be safely broken up by the
blade.
Do not use the blender with hot liquids. •
DANGER OF SCALDING!
Do not yank or pull the cord as this may •
damage it and eventually cause a risk of
electric shock.
To Next Page
Loading...
