Tesco DMS1701 - Bluetooth Audio Playback; Pairing Bluetooth Devices; Connecting and Playing Music; Playback and Disconnection

12
PLAYING BLUETOOTH AUDIO FROM A MOBILE DEVICE
Your music system can play Bluetooth audio from a mobile
phone, tablet or laptop computer.
The Bluetooth source must be paired to your music system.
Pairing with a Bluetooth device
Press the • MODE button repeatedly to select Bluetooth
mode.
‘BT LINK’ will ash on the display.
Activate • Bluetooth on the mobile device source.
If the source is a phone or tablet, Bluetooth will normally be
activated in the connectivity section of the settings menu.
If the source is a computer, Bluetooth settings should be
found in the Control Panel.
In the • Bluetooth menu of the source, there should be
an option to search for Bluetooth devices. Select this
option.
The source will now scan for other Bluetooth devices and
should nd the music system, identied as ‘DMS1701’.
Choose to pair with this.•
If the device features Bluetooth technology earlier than V2.1,
you will be asked for a password.
If so, enter 0000.•
Your Bluetooth source will now be connected to the music
system. Once connection has been established, the ‘BT LINK’
display will stop ashing.
After pairing for the rst time, the music system will appear in
the connection menu of your Bluetooth device.
Re-connecting
Your device should re-connect automatically when next used
if no other device has been connected since.
Playing music
Once connected you can select music on the source and play
it through your music system.
Volume control
When playing Bluetooth audio it is possible that the volume
control of the source will also aect the volume level from
your music system.
Ensure that the volume control of the source is set at a high
enough level.
Playback control
Some mobile devices will support remote control for music
navigation. In this case //, on your music system can be
used to select play/pause at the source, and } and { will
select the next or previous track.
Disconnecting a device
You can disconnect a device if required. This may be necessary
if you want to pair your system to a dierent Bluetooth
device.
Press and • hold the MENU button.
The device will be disconnected and your system will be
available to pair with another device.