BEFORE FIRST USE
To prepare the remote control for
rst use, pull out the safety strip to
activate the battery.
REPLACING THE BATTERY
When replacing the battery in the remote
control, refer to the diagram below.
Press the catch across.1.
While holding the catch, open the 2.
battery door.
Dispose of used batteries with regard to the recycling regulations in your area. Do NOT
short circuit batteries or throw them into water, the general rubbish or in a re.
Weak batteries can leak and damage the remote control. Replace them in good time!
Fit the battery observing polarity 3.
as shown. When replacing the
battery, use only the same
CR2025 type specied.