Page 4
Attaching and Removing the Flexible Hose Attaching the Hose Extensions
To Attach: You can use the cleaner using only the hose or with the
extension tube/s fitted.
Push the collar firmly into the Hose Inlet and check that the
collar snaps into place.
To Remove:
Press the spring latch in and remove the hose.
Parking the Attachments
You can park the floor brush when you are not using it on the
Storage Hook located at the rear of the cleaner.
Assembling your Vacuum Cleaner
Never attach or remove accessories when the vacuum cleaner is switched on.
VC109 Vacuum Cleaner User Guide
Join both tubes
Attach the handle
Attach the Floor Brush
(if required)
To Next Page
Loading...
