Need help?Do you have a question about the Teseq NSG 438 and is the answer not in the manual?
General| Brand | Teseq |
|---|---|
| Model | NSG 438 |
| Category | Test Equipment |
| Language | English |
Explains the integrated interlock system for high voltage safety.
Outlines the procedure for performing an initial function test and self-test.
Guides on the proper procedure for powering on the ESD simulator.
Covers general operation via the touch-panel and setting adjustments.
Details how to access and set the desired discharge voltage.
Explains how to select positive, negative, or alternating polarity.
Describes the modes for preset and down counters for test sequences.
Explains how to select single pulses or set repetition rates.
Explains the self-test procedure for verifying simulator operation.
Guides on selecting pre-programmed standard test configurations.
Explains the digital calibration process and required measurement equipment.
States that repairs must be performed by authorized service personnel.
Lists system error codes, their explanations, and recommended actions.
To Next Page
