3
FOR THE INITIAL USE
Blending fruit and vegetable:
NOTE
1. Unpack the appliance and place all parts on a horizontal surface.
2. Immerse jar, jar cover in warm soapy water and rinse them and dry. Never immerse motor unit in water for
cleaning to prevent the risk of electric shock.
1. Place the Jar on the Motor Unit, Turn the jar clockwise until a click will be heard when locked into position
properly. Please see Fig.1
Before assembling the jar, be sure the power cord is unplugged from the power outlet and the Switch button
is on the 0 position.
The jar is suitable for making mixture which the juice and pulp are mixed.
3. The correct assembly way will be described in detail in below sections.
CAUTION!
1. Before attaching the power cord into the outlet, make sure the Switch button is in the 0 position.
2. Peeled or cored the fruit or vegetables and then cut it into small dices, put the food piece into the Jar. Usually
certain amount of purified water has to be added to facilitate the smooth running of appliance. The proportion
of the food and water is 2:3.The amount of mixture should not exceed the max level as indicated on the Jar.
Note: never use boiling liquids or run the appliance empty. The Jar can be used for breaking up ice.
3. Replace the Jar cover on the Jar. Turn the Jar cover into the Jar.
4. Turn the Switch button to the desired setting, there are two settings: P, 0, 1,2. Turn switch to P position and hold
it to pulse actuate motor for delicate chopping. Release it to return the 0 position.
5. The consecutive operation time shall less than 3 minutes. Minimum 1 minutes rest period is required between
two consecutive cycles.
6. Turn the Switch button to 0 Position once the mixture has been blended to your desired consistency.
7. Remove the Jar from the Motor Unit (remove it by directly upward), carefully take down the Jar cover, then pour
and serve.
The blade is very sharp, please handle carefully.
Make sure the Jar is assembled into the motor unit properly, there is interlock switch on the
position, if the Jar is not assembled properly, the blender will not operate.
Fig.1
To Next Page
Loading...
General