4
CLEANING AND MAINTENANCE
• The Auto Clean feature can clean the blender and blade assembly easily, rapidly in complete safety.
• Pour a little warm soapy water into the Jar and turn the Switch button to P position for a few seconds.
• Remove the Jar from the motor unit by directly taking it upward and rinse the Jar, Jar cover under running water.
• Wiping the outer surface of Motor Unit with a damp cloth, do not use abrasive cleansers. Never immerse in water
for cleaning
• Dry all parts and then replace them
• For complete cleaning, you can hold the blade assembly at the bottom of jar carefully, for it is sharp, take it out by
turning coupling on the other side clockwise emphatically (see Fig.2), then put the detachable accessories into
Dishwasher for clean, they are dishwasher safe components, but the temperature setting shall not exceed 70ºC
• If any problem has been encountered during use never disassemble the Motor Base by yourself, no user
serviceable parts inside. Contact only the authorized service facility for examination and repair.
TECHNICAL SPECIFICATION
Voltage: AC 220V - 240V~
Frequency: 50Hz-60Hz
Power: 500W
Capacity 1.5L
Correct Disposal of this product:
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased, they can take this product for
environmental safe recycling
To Next Page
Loading...
General