Rear Outboard Seats
Infants and children can occupy a rear outboard seat using either belt-based, or ISOFIX (IU)//i-
Size (i-U) child restraint systems.
NOTE: The rear seats support the use of upper tether straps (see Attaching Upper Tether Straps
on page 47).
Larger children can also occupy a rear outboard seat using a booster seat, either attached to
the lower anchor bars or belted, as described in the instructions provided by the child restraint
system manufacturer.
The rear outboard seats support the use of the following ISOFIX size classes:
• Size class A, B, and B1 forward-facing.
• Size class C, D and E rear-facing.
NOTE: To accommodate large rear-facing ISOFIX child restraint systems (size class C), you may
need to move the corresponding front seat forward to the mid-track position (up to 13 cm
forward of the rearmost position), raise the seat upward (2 cm from its lowest position), and
angle the seat back as needed.
Child Safety Seats
43Seating and Safety Restraints
To Next Page
Loading...
