In the rear seats, install LATCH child safety seats in the
outboard seating positions only. Use only a seat belt
retained seat in the center position.
To install a LATCH child safety seat, lift the flap (if
equipped) to allow access to the anchors.
Carefully read and follow the instructions provided by
the manufacturer of the child restraint system. The
instructions describe how to slide the child restraint
system onto the seat’s anchor bars until you hear it
"click" into place. You may need to push the child
restraint system
firmly against the seat back to ensure it
fits snugly. The flap (if equipped) remains open when
the child seat is installed.
Adjust until the child restraint system is fitted firmly
against the seat back. Ensure the child restraint system
fits snugly.
Child Safety Seats
35Seating and Safety Restraints
To Next Page
Loading...
