Limitations
Summon is unlikely to operate as intended in the
following types of situations:
•
The driving path is sloped. Summon is designed to
operate on
flat roads only (up to 10% grade).
• A raised concrete edge is detected. Summon does
not move Model Y over an edge that is higher than
approximately
2.5 cm.
•
One or more of the ultrasonic sensors (if equipped)
or cameras is damaged, dirty, or obstructed (such as
by mud, ice, or snow, or by a vehicle bra, excessive
paint, or adhesive products such as wraps, stickers,
rubber coating, etc.).
•
Weather conditions (heavy rain, snow, fog, or
extremely hot or cold temperatures) are interfering
with sensor operation.
•
The sensors (if equipped) are aected by other
electrical equipment or devices that generate
ultrasonic waves.
NOTE: Summon is disabled if Model Y is in Valet mode
(see Valet Mode on page 44).
WARNING:
The list above does not represent an
exhaustive list of situations that may interfere with
proper operation of Summon. It is the driver's
responsibility to remain in control of Model Y at all
times. Pay close attention whenever Summon is
actively moving Model Y and stay prepared to take
immediate action. Failure to do so can result in
serious property damage, injury or death.
Summon
110 MODEL Y Owner's Manual
To Next Page
Loading...
