Tesla MODEL Y 2022 - Page 14

NOTE: When adding a key fob, ensure it is at
room temperature. Pairing a key fob that is
very cold can be unsuccessful.
1. On the touchscreen, touch Controls >
Locks then touch + in the Keys section.
2. Scan your new key card or key fob on the
card reader located behind the cup
holders on the top of the center console.
After the new key card or key fob is
recognized, remove it from the card
reader.
3.
Scan a key card or key fob that has
already been paired to the vehicle to
confirm new key pairing.
4.
When complete, the key list includes the
new key. Touch the associated pencil icon
to customize the name of the key.
To add a new phone key, see Phone Key on
page 8.
Removing a key:
When you no longer want a key to access
Model Y (for example, you lost your phone or
key card, etc.), follow these steps to remove
it.
1.
On the touchscreen, touch Controls >
Locks.
2. In the key list, find the key that you would
like to delete and touch its associated
trash icon.
3.
When prompted, scan an authenticated
key card or key fob on the card reader to
confirm the deletion. When complete, the
key list no longer includes the deleted key.
NOTE: Model Y requires at least one
authenticated key card or key fob at all times.
If only one key card remains on the key list,
you cannot delete it.
Keys
12 MODEL Y Owner's Manual