EasyManua.ls Logo

Tesla S 2017 - Subsystems; Brake System Specifications; Suspension System Specifications; Battery Specifications

Tesla S 2017
195 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Brakes
Type
4-wheel anti-lock braking system (ABS)
with Electronic Brake Force Distribution,
Integrated Advanced Stability Control and
Electronic Accelerator pedal actuated
regenerative braking system
Calipers Four piston fixed
Rotor Diameters (ventilated)
Front: 13.98”/355 mm
Rear: 14.37”/365 mm
Front Rotor thickness
New: 1.26”/32 mm
Service limit: 1.18”/30 mm
Rear Rotor thickness
New: 1.10”/28 mm
Service limit: 1.02”/26 mm
Front Brake Pad Thickness (excluding back plate) 0.393”/10 mm
Rear Brake Pad Thickness (excluding back plate) Base: 0.354”/9 mm
Parking brake
Electrically actuated parking brake
calipers
Suspension
Front Independent, double wishbone, air spring
or coil spring/telescopic damper, sway bar
Rear Independent, multi-link, air spring or coil
spring/telescopic damper, sway bar (air
suspension vehicles only)
Battery - 12V
Rating
33 amp hour or higher
Voltage and Polarity 12V negative (-) ground
Battery - High Voltage
Type
Liquid-cooled lithium ion (Li-ion)
Rating 60, 70, 75, 85, 90, or 100 kWh (at
beginning of life)
Nominal Voltage - 85, 90, and 100 kWh
Nominal Voltage - 60, 70, and 75 kWh
350 V DC
300 V DC
Temperature Range Do not expose Model S to ambient
temperatures above 140° F (60° C) or
below -22° F (-30° C) for more than 24
hours at a time.
Subsystems
Specifications 169

Table of Contents

Related product manuals