BUTTON
Note: The graphics are for representation only.
TERMINALS
Note: The terminals may differ by model or region, and please select the terminals according
to the actual TV you have.
1 Cl CI card port.
2 AV IN
Connect audio and/or video signal from signal
source such as DVD.
3 HDMI1/2
Connect HDMI input signal from signal source
such as DVD.
4 DIGITAL AUDIO OUT
Use a SPDIF cable to connect your TV to a
compatible audio receiver.
5 EARPHONE
Audio output, speakers will be muted when
earphone is plugged.
6 USB USB port
7 ANTENNA IN (ANT.)
Connect a coaxial cable to receive signal from the
antenna, AIR/CABLE/LNB cable or satellite.
8 SERVICE
Debugging interface only for professional
technician
Bottom view
Press middle button:
1. In standby mode, press it to turn on the TV;
2. Without OSD, short press it to access source menu; long press to turn the TV to standby;
3. With OSD, short press it to confirm a selection; long press it to return or exit.
Push left: decrease volume or go to left.
Push right: increase volume or go to right.
Push forward: channel up or go to above.
Push backward: channel down or go to below.
Rocker Button
Forward
Left Right
Backward
To Next Page
Loading...
