Tesmec AFB506 - Page 42

PULLER
-
TENSIONER
Model: AFB506
TABLE 1.4
1) Generator light.
2
) Fuel level light..
3) Pre-heating glow plugs light.
4) Engine WARNING pilot light.
5) Engine ALARM pilot light.
6) Clogging filters light.
7) Clogging filters light.
8) Clogging filters light.
9) Max. pull light.
10) Circuit 1 alarm light.
11) Circuit 2 alarm light.
12) Engine fuses (FM) light.
13) Electrical circuit fuses (FB) light.
14) Multi-functional display.
15) Meter-counter capstan 1 reset push-button.
16) Meter-counter capstan 2 reset push-button.
17) Ignition key.
18) Accelerator.
19) Front plough lifting.
20) Compressor control selector (optional).
21) Rope-clamp 1 control selector (optional).
22) Rope-clamp 2 control selector (optional).
23) Hydraulic head no. 1 manometer.
24) Hydraulic head no. 1 adjusting valve.
25) Hydraulic head no. 2 manometer.
26) Hydraulic head no. 2 adjusting valve.
27) Hydraulic oil cooling fan manometer.
28) Hydraulic oil cooling fan (& front plough) adjusting valve.
29) Low pull position light gear-box no. 1.
30) Bull-wheel no. 1 dynamometer.
31) Feeding manometer no. 1.
32) Selector for bull-wheel 1 pull setting.
33) Adjusting knob for pull-tension no. 1.
34) Bull-wheel no. 1 pump control lever.
35) Low pull position light gear-box no. 2 (optional).
36) Bull-wheel no. 2 dynamometer.
37) Feeding manometer no. 2.
38) Selector for bull-wheel 2 pull setting.
39) Adjusting knob for pull-tension no. 2.
40) Bull-wheel no. 2 pump control lever.
41) Emergency push button.
42) Selector for by-pass circuits connection.
43) Tension synchronizer 1-2 selector.
44) Connected machines selector (optional).
45) Speed synchronizer selector (optional).