Notes
16 Testboy
®
20 Plus
General safety notes
WARNING
Unauthorized changes or modifications of the instru-
ment are forbidden – such changes put the approval
(CE) and safety of the instrument at risk. In order to
operate the instrument safely, you must always ob-
serve the safety instructions, warnings and the infor-
mation in the "Proper and Intended Use" Chapter.
WARNING
Please observe the following information before using
the instrument:
| Do not operate the instrument in the proximity of
electrical welders, induction heaters and other elec-
tromagnetic fields.
| After an abrupt temperature fluctuation, the instru-
ment should be allowed to adjust to the new tem-
perature for about 30 minutes before using it. This
helps to stabilize the IR sensor.
| Do not expose the instrument to high temperatures
for a long period of time.
| Avoid dusty and humid surroundings.
| Measurement instruments and their accessories are
not toys. Children should never be allowed access
to them!
| In industrial institutions, you must follow the acci-
dent prevention regulations for electrical facilities
and equipment, as established by your employer's
liability insurance organization.
To Next Page
Loading...
Need help?
General
