Testifire 1001-1 User Manual

USER MANUAL
1000
SERIES
www.detectortesters.com/testire

Testifire 1001-1 Specifications

General

Brand	Testifire
Model	1001-1
Category	Test Equipment
Language	English

Summary

Preparation for Use

Battery Charging and Insertion

Instructions for charging the Solo NiMH battery baton and inserting it into the Testifire unit or access pole.

Smoke Capsule Insertion

Getting Started

Interface and Main Menu

Single Test

5.1 Default Smoke Test

Step-by-step instructions for conducting a default smoke test on a detector.

Heat Testing

Sequential Testing

6.1 Smoke Test + Clearing

Smoke and Heat Test Sequence

Smoke, Clear, and Heat Test Sequence

Simultaneous Testing/Multi-Sensor Testing

7.1 Smoke/Heat

Procedure for performing smoke and heat tests concurrently on multi-sensor detectors.

Removing & Replacing Consumables

10.1 Removing the Smoke Capsule

Instructions for safely removing the used smoke capsule from the unit.

10.2 Replacing the Smoke Capsule

Step-by-step guide for inserting a new smoke capsule into the Testifire.

Battery Removal and Replacement

Technical Specifications

Troubleshooting & Support

14.1 Identifying Errors

Guide to understanding error messages and their corresponding status LED indications.