TESTO 510 Short Manual

Short manual testo 510 11
Short manual testo 510
1 Protection cap: Park position
2 Differential pressure sensor nipple
connection
3 Display
4 Control keys
5 Battery compartment, holding
magnets (on rear)
Basic settings
Instrument off >press and hold
2s > select with ( ),
confirm with
( ):
Unit of pressure/velocity: hPa, mbar, Pa, mmH2O, mmHg, psi, inH2O, inHG, m/s, fpm
> Density of the medium (Density) > Auto off function: OFF, ON
Switching the instrument on
Press
.
Switching the display light on (for 10s)
Instrument on > press
Select display mode
Instrument on > select with
:
Current reading > Hold: Readings are held > Max: Maximum values > Min: Minimum
values > Hold Avg: Timed mean value calculation, see below
Timed mean value calculation for flow
Press
several times, until Hold and Avg appear > Hold down
until
- - - - appears > Releasing starts mean value
calculation, the current readings
are displayed > End measurement: press
,
the mean value is
displayed.
Switching the instrument off:
Instrument on >press and hold
2s.
de
enfresitptsvnl????

TESTO 510 Specifications

General

Measurement Range	0 to 100 hPa
Resolution	0.01 hPa
Dimensions	119 x 46 x 25 mm
Storage Temperature	-20 to +70 °C
Protection Class	IP40
Battery Type	2 x AAA batteries
Measuring Units	hPa, mbar, inH2O, mmHg, psi
Accuracy	±0.03 hPa (0 to 0.30 hPa) ±0.05 hPa (0.31 to 1.00 hPa) ±(0.1 hPa + 1.5 % of mv) (1.01 to 100 hPa)
Weight	90 g