TESTO 511 - Basic Settings and Operation; Switching the Instrument On; Switching the Display Light On; Selecting Display Size

11
Short manual testo 511
 Protection cap: Park position
 Absolute pressure sensor nipple
connection
 Display
 Control keys
 Battery compartment, holding
magnets (on rear)
Basic settings
Instrument off >press and hold 2s > select with ( ),
confirm with ( ):
Unit of height above mean sea level: m, ft > Value of height above mean sea level
(Altitude) > Unit of pressure: hPa, mbar, Pa, mmH2O, mmHg, psi, inH2O, inHG, >
Auto off function: OFF, ON
Switching the instrument on
Press .
Switching the display light on (for 10s)
Instrument on > press
Select display size
Instrument on > select with :
Absolute pressure, barom (barometric pressure), Altitude (height above mean sea
level)
Select display mode
Instrument on > select with :
Current reading > Max: Maximum values > Min: Minimum values
Switching the instrument off:
Instrument on >press and hold 2s.
de
enfresitptsvnl????
Short manual testo 511