16
²
Changing the parameter:
The parameter can be changed.
Adjustable parameters
· Absolute pressure
· barom (barometric pressure)
· Altitude (height above mean sea level)
i Press several times until the desired parameter appears.
²
Changing the display view:
Adjustable views
· Current reading
· Max: Maximum values since the instrument was last switched on or last reset.
· Min: Minimum values since the instrument was last switched on or last reset.
i Press several times until the desired view appears.
²
Resetting Max/Min values:
1 Press several times until the desired view appears.
2 Press and hold until
---- appears.
3 Repeat steps 1 and 2 for all values that are to be reset.
²
Switching the instrument off:
i Press and hold until the display goes out.
Maintaining the product
±
Changing batteries:
1 To open the battery compartment, push the battery cover
down.
2 Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
±
Cleaning the housing:
i Clean the housing with a moist cloth (soap suds) if it is dirty.
Do not use aggressive cleaning agents or solvents!
Maintaining the product
To Next Page
Loading...
