TESTO 512 - Page 12

5. Operation32
5
Setting mmax/min ppressure ffunction:
 The configuration modus is open, MaxMin lights up
i Select the desired option with / and confirm
with :
· On: When printing current or recorded
measurement values, maximum and minimum
values of the parameters pressure and flow
(versions 2hPa, 20hPa und 200hPa only) are also
printed out.
· OFF: When printing current or recorded
measurement values, maximum and minimum
values of the parameters pressure and flow
(versions 2hPa, 20hPa und 200hPa only) are not
printed out.
- and the set unit of temperature light up.
6
Setting ttemperature-ppressure mmodus:
 The configuration modus is open, and the set unit
of temperature light up.
i Select the desired option with / and confirm
with :
· On: When printing current or recorded
measurement values, the temperature
measurement value is also printed out.
· OFF: When printing current or recorded
measurement values, the temperature
measurement value is not printed out.
7
To sset AAuto OOff:
 Configuration mode is opened, AutoOff is lit.
i Select the desired option with / and confirm
with :
· on: The measuring instrument switches off auto-
matically if no button is pressed for 10min.
Exception: A recorded reading is shown on the
display (Hold is lit).
· oFF: The measuring instrument does not switch
itself off automatically.