6. Measuring 35
²
Resetting tthe mmaximum/minimum vvalues:
The maximum/minimum values of all channels can be
reset to the current reading.
1 Press several times until Max or Min lights up.
2 Press and hold (approx. 2s).
- All maximum or minimum values are reset to the
current reading.
²
Printing rreadings:
A Testo printer is required (accessory part).
When printing current or recorded measurement
values, maximum and minimum values of the
parameters pressure and flow (versions 2hPa, 20hPa
und 200hPa only) are also printed out.
º See the chapter P
ERFORMING SETTINGS.
i Press .
deenfresitptsvnl????
To Next Page
Loading...
