3 Product-specific information
5
Product-specific information
• Do not carry out measurements on live components.
• Do not expose handles and feed lines to temperatures in excess of 70°C
unless they are expressly approved for higher temperatures. Temperature
specifications on probes/sensors refer only to the measuring range of the
sensor system.
• Only open the measuring instrument if this is expressly described in the
documentation for the purposes of maintenance or servicing.
Intended use
The testo 535 is a handy, robust measuring instrument for recording ambient
CO
2
values. It is used for risk prevention and is intended for indoor use only.
Fields of application are, for example
• Evaluation of the indoor climate
• Heating systems with room air-dependent operation
• Ventilation systems
The product should not be used in the following areas:
• In potentially explosive atmospheres.
• For diagnostic measurements in the medical field.
1.888.610.7664 sales@GlobalTestSupply.com
www.Testo-Direc t.com
To Next Page
Loading...
Need help?
General
