Tesunho TH-682 - Quick Operation; Bluetooth Function; Quick Search Function

8
6. Quick Operation
a. Define Quick Group/user call: Enter “Choose group” Or “Friend list” Or “User list”, long press the P1-P6
keys to store the current chosen group, friend or user to the corresponding key.
b. Quick Operation: Long press P1-P6 keys to call the group, friend or user stored to the keys.
7. Bluetooth Function
1) Enter “Setting”, then “BT Control”, turn on the Bluetooth Function.
2) Bluetooth handset boot (if first time initial, handset should enter into the pairing mode).
3) When the Bluetooth icon changes green, it is connected successfully.
* Note: a. If the Bluetooth is disconnected and has not been reconnected for more than 3 minutes, the Bluetooth
will go to sleep. Please press the SOS button to wake up the Bluetooth.
b. When the Bluetooth connect successfully, the control of the Bluetooth handset can be temporarily
blocked by short pressing the SOS key. Click again to return to Bluetooth Function.
8. Quick search function
1) Under the menu “Group list” Or “User list” Or “Friend list”, you can click P6 to enter quick search function.
2) Key functions:
P1: Left P2: Right P3:OK P6：Page down
3) Operation:
a. Press P1 or P2 or P6 to choose numbers or letters you want, and confirm the selected letters by P3. Group(s),
User(s) or friend(s) searched will be shown.
3) “Up” key or “Down” key to choose the one you want to talk. Press Menu to confirm your operation.
9. GPS Patrol
1) Short press P2 Key in standby mode to realize GPS Patrol.
Radio display “Waiting” when sending GPS information to platform.
Please wait a moment to enter Patrol Menu.
2) Two different situations after enter Patrol Menu
a. Have patrol task
The task(s) will show below the message- “Date, Time and On/Out Planned patrol period”.
Short press Up/Down Keys to choose the options and press Menu Key to confirm.
After the task is completed, press any key to exit.
b. Have no patrol task
Show message- “Date, Time and On/Out Planned patrol period” on radio only.
NOTE: To realize GPS Patrol, radio must have GPS function and able to be located.
The radio version must be V32 or above.
10. RFID/NFC Patrol
1) Short press PF2 Key in standby mode to read RFID tag.
Put “NFC” marked area on the RFID/NFC tag.
Please try again if radio display “Read Tags Failed”.