Tetra ColorFusion Bubbling LED - User Manual

Hood & Filter Placement and Start Up
4
A. Install Filter so it lines up beneath the
Hood cutout.
B. Plug AC adapter into power outlet.
Make a Drip Loop for safety.
C. Press switch to cycle auto changing color fusion
LEDs. Press again to pause at desired color.
Press and hold to turn off.
LIMITED ONE YEAR WARRANTY: Within one year from the date of original purchase (shown on
your receipt), we will repair or replace, at our option, any of the following components which are deemed
defective in workmanship or materials. This includes: LED Lights, Hood, Bubble Tube or Air Pump.
Please return the suspect component(s) together with proof of purchase (your receipt):
Call (800) 526-0650 for return authorization and shipping address.
Damage or injuries resulting from negligence or misuse are not covered by this warranty. Incidental or
consequential damages are specifically excluded.*
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
*Because some states do not allow the exclusion of incidental or consequential damages, this exclusion may not apply to you.
02/14 P/N R08307 Rev. A
If the LED lights fall into the water: This LED light is waterproof. Simply remove the LED Light from
the water and attach it to the frame using the LED frame clip.
Troubleshooting Guidelines
Distributed by United Pet Group, Inc. (UPG)
3001 Commerce St., Blacksburg, VA 24060
®Regestered Trademark and ™Trademark of
United Pet Group, Inc. or one of its affiliates.
©2014 UPG
Drip Loop
(for safety)
B
Light
Switch
C
Install Filter
A
IMPORTANT:
Always unplug the LED
Lights before inspecting
or beginning any
maintenance procedures.
Waterproof
Tetra
®
ColorFusion
LED Light
LED
Frame Clip
Light Switch
Low Voltage
Transformer
Parts Check
Start Here - Tetra
®
ColorFusion Aquarium Kits
Quick Setup Guide for Kit Sizes: 5 and 10 gallons
Hood
1
KEY ITEM # DESCRIPTION
A R07016 6˝ Tetra
®
ColorFusion LED Light (5g Kit)
A
R07014 8˝ Tetra
®
ColorFusion Light (10g Kit)
B
R03942 16˝ x 9˝ Hood (5g Kit)
B
R03943 20˝ x 10˝ Hood (10g Kit)
C R07017 Bubble Tube with Check-Valve
D R07015 Air Pump with Air Line Tubing
Replacement Parts List
A
Questions or Missing Parts Call Customer Service (800) 526-0650
M-F 7:30 a.m. - 5:30 p.m. (Eastern Time) www.tetra-fish.com
© 2014 United Pet Group, Inc.
B
C
D
Feeding
Hole
Bubble
Tube
Check
Valve
Air Line
Tubing
Air Pump
Cord Routing
Clips (2)
QUANTITY
1
1
1
1
1
1

Tetra ColorFusion Bubbling LED Specifications

General

Material	Plastic
Power	Low Voltage
Bubble Feature	Yes
LED Lights	Yes
Product Type	Aquarium Decoration
Type	LED Bubbler
Lighting	LED
Color Options	Multi-color
Air Stone	Yes

Summary

Hood & Filter Placement and Start Up

Installation Steps

Steps for installing the filter and powering up the LED lights, including safety recommendations.

Troubleshooting LED Lights

Guidance on handling the LED light if it accidentally falls into the water.

Tetra ColorFusion Aquarium Kits Quick Setup Guide

Parts Check

Verify all components are present in the kit before proceeding with setup.

Replacement Parts List

Details available replacement parts with item numbers for reference.

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for operating aquarium equipment, including electrical and handling safety.

Electric Shock Prevention

Specific warnings and procedures to avoid electric shock hazards when using aquarium equipment.

LED Light Installation

Installation Steps

Instructions for clipping the LED light into the aquarium frame and securing wires.

Bubble Tube Assembly and Installation

Assembly and Installation Steps

Guide for assembling the bubble tube with airline tubing and check valve and attaching it to the aquarium.

Bubble Tube Troubleshooting

Solutions for issues like no air flow or diminished air flow from the bubble tube.