What to do if my Tetra FilterJet 400 pump will not operate?
If your Tetra Water Filtration System pump isn't working, first ensure it's properly connected to a power supply. If it is connected, the pump may be faulty, in which case you should contact your retailer or Tetra Customer Service. Alternatively, a blocked impeller could be the cause; try cleaning the pump to resolve this.
Why does my Tetra Water Filtration Systems have insufficient water flow?
If your Tetra Water Filtration System is showing insufficient water flow, the pump may be clogged. Try cleaning it. If cleaning doesn't help, the pump may be faulty, so contact your retailer or Tetra Customer Service. Another possible cause is a worn impeller, which would need to be replaced.
Guidelines to avoid dangerous situations during product use.
Precautions to prevent damage to the device or its components.
Solutions for malfunctions like pump not operating or low flow.
General| Brand | Tetra |
|---|---|
| Model | FilterJet 400 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page