To Next Page
T
Tammie HarperAug 2, 2025
What to do if the water level is too low in Teuco 543-Y?
- SScott WeaverAug 2, 2025
To resolve insufficient water level in your Teuco Bathtubs, simply top up the water level in the tub.
What to do if the water level is too low in Teuco 543-Y?
To resolve insufficient water level in your Teuco Bathtubs, simply top up the water level in the tub.
What to do if sanitiser level is low in Teuco 543-Y Bathtubs?
To address an insufficient sanitiser level in your Teuco Bathtubs, add sanitiser using the dedicated top-up as described in the SANITISING FUNCTION section.
Detailed identification of the bathtub's physical components and their functions.
Initial setup steps and first-time operation guide for the product.
Explanation of the touch control panel's operation and interface.
Procedure for powering on the Teuco product and its display.
Overview of the home screen icons and their functions on the control panel.
How to use and control the chromotherapy (light therapy) feature.
Instructions for operating and adjusting the whirlpool jets and related features.
Guide to activating and selecting different sonic-massage programs.
Procedure for the automatic sanitisation of the bathtub after use.
Guidance on cleaning the general surfaces of the bathtub.
Detailed steps for cleaning and maintaining the whirlpool jet components.
Explanation of common error codes and visual indicators of system faults.
List of specific fault codes, their descriptions, and recommended actions.
General
