To Next PageTo Next Page
Need help?Do you have a question about the Teuco Evolution E02 A and is the answer not in the manual?
General| Brand | Teuco |
|---|---|
| Model | Evolution E02 A |
| Category | Shower Cabins |
| Language | English |
Lists various tools required for the proper assembly of the product.
Details the contents of accessory bags provided for installation.
Provides net weight, shipping weight, and shipping volume for the models.
Outlines hydraulic flow rates, pressure ranges, and electrical power ratings.
Attaching the bracket to the wall, marking, drilling, and securing it.
Installing and securing the equipped control panel for sauna models.
Installing the drain valve, positioning the tray, and connecting the drain pipe.
Disassembling clips and attaching side panels to the shower tray.
Preparing, installing, and attaching the upper guide rail.
Mounting the rear panel and installing the door onto the main structure.
Fitting seals along the upper guide rail and the right side of the door.
Fitting seals along the upper guide rail and the rear panel.
Adjusting rear panel and door alignment using friction units.
Installing the dome on the upper guide rail, ensuring pipes are behind.
Connecting hot water, cold water, and shower head for E02 A model.
Connecting hydraulic lines for E02 C model.
Connecting electrical lines for E02 C model.
Installing the shelf and securing the rear panel to the structure.
Preparing and attaching side panels to the tray and wall brackets.
Tightening screws for side panels.
Applying neutral silicone between the tray and floor to prevent leaks.
