EasyManua.ls Logo

TEUPEN LEO 23 GT User Manual

Default Icon
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Technical specifications are subject to change without notification
TEUPEN Maschinenbaugesellschaft mbH
Place of business: Marie-Curie-Strasse 13 - D 48599 Gronau - Telephone 02562 / 8161-0 - Telefax 02562 / 8161-888
Postal address: Postfach 1951 - D 48580 Gronau Internet: http://www.teupen.info - E-mail: mail@teupen.info
Operating Instructions
for Aerial Work Platform
LEO 23 GT
Machine no. 140671
Courtesy of CraneMarket.com
Question and Answer IconNeed help?

Do you have a question about the TEUPEN LEO 23 GT and is the answer not in the manual?

TEUPEN LEO 23 GT Specifications

General IconGeneral
Working Height23 m
Platform Capacity200 kg
Overall Width0.98 m
Overall Height1.98 m
Basket Load200 kg
Platform Height21.00 m
Dimensions (Transport)6.20 m x 0.98 m x 1.98 m
Stowed Dimensions (LxWxH)6.20 m x 0.98 m x 1.98 m

Summary

Safety Instructions and Warnings

General Safety Precautions

General safety regulations and hazards associated with the machine's use.

Mandatory Compliance and Safety Devices

Emphasizes compliance with instructions, maintenance, and the integrity of safety devices.

Slope and Operational Safety

Guidelines for operating on slopes and preventing falling over.

Operational Limits and Restrictions

Details minimum age, maximum side force, no climbing, and vibration restrictions.

Environmental and Machine Use Hazards

Highlights dangers of high voltage, wind speed, traffic, and prohibited uses like crane operations.

Electric Power Supply

Hydraulic Rubber Chain Drive System

Slope Operation Limits

Specifies permissible slope angles for driving the machine.

Operation of Aerial Work Platform

Emergency Control Procedures

Procedures for operating the machine using the manual pump in emergency situations.

General Maintenance Instructions

Faults, Causes, and Repair

Arm Movement and Support Faults

Addressing issues with arm extension, lowering, slewing, and support system faults.

Indicator Lamp and System Faults

Troubleshooting red lights, motor pump issues, cylinder lowering, and system errors.