TEVERUN BLADE X User Manual

Parts Replacement Schedule
BLADE X
Parts name Replacement cycle / km
handle bar
2YEARS / 20,000
STEERING TUBE 3YEARS / 20,000
BATTERY 2YEARS / 20,000
Other chassis If the exterior is damaged or deformed
* Metal vibration may occur due to motor vibration and the vibration of
the brake disc and pad during the load
section that accelerates during driving. (About 15 ~ 30Km, different for
each product)
This is a phenomenon in which all rotations (fans, automobiles, ships, etc.)
are vibrating at a specific rotational
frequency (rpm) rather than the product.
However, if the continuous noise or metal noise is large, there is a possi-
bility that the disk will become bent
and deformed.
* Please note that after running, there is a risk of burns due to the heat
on the motor and brake (especially
disk rotor) side.
* Be careful that the bolts of the motor, rim, and motor shaft may become
loosened due to the ABS function.
* For inspection and repair, remove the side cover, attach the power
switch, and attach it with the product's
standard bolt. When tightening, carefully remove the cover of the wiring.
Bolts other than the rule bolts (long
bolts) can cause serious damage to the battery casing (battery cells),
which can cause fire or safety accidents.
※ Folding parts and joints where movement occurs due to product
characteristics can naturally damage
the surface or paint surface during use, especially when operating in
incorrect operation and form.
※ When inspecting the product, keep two wheels away from the ground
and work on a safe workstation
Dualtron XII User Manual
19
Check and Maintenance
1. Check the replacement timing of consumable parts
CHECK LIST
2) Maintenance and self-maintenance
Electric products can be damaged by various factors.
The life span of each part varies depending on driving habits and driving environment.
Parts that exceed the service life may cause accidents.
Let's manage various parts and prevent safety accidents in advance.
2. External damage inspection by driving environment
ķ Replace parts that may be damaged by the external driving environment, such as deformation of
parts or tiny cracks due to pressure.
ĸ If the product is exposed to strong sunlight for a long time, discoloration may occur.
Ĺ In case of jumps, slight impacts such as turning, collision, etc., when driving frequently or for a long
time in a poor road condition or driving for thousands of kilometers or more, fatigue breakdown
phenomena may happen so please check the parts replacement schedule for each product and
replace accordingly for safety.
ĺ Fatigue breakdown and maintenance parts may differ from the example conditions depending on
the driving environment and the operating conditions.
Also check parts other than the replacement cycle
(maintenance parts) at all times to check for any
signs of abnormality.
ķ The components and suspension parts of the swing arm, tires, wheels, bearings, discs, brake pads,
cables and folding parts, various brackets and other consumable parts require periodic inspection
and must always be checked.
Parts Replacement Schedule
DUALTRON X II
No. Parts name Replacement cycle / km
1 HANDLE BODY 3YEARS / 20,000
2 STEERING TUBE 3YEARS / 20,000
3 BATTERY 2YEARS / 20,000
4 Other chassis
components
If the exterior is
damaged or deformed
ķ
Ĺinside
ĸ
Ĺinside
D A N G E R
W A R N IN G
N O TICE
DANGER
Important check list
1615

TEVERUN BLADE X Specifications

General

Brand	TEVERUN
Model	BLADE X
Category	Scooter
Language	English