To Next PageTo Next PageHow to fix Tevion DIGITAL MINI SATELLITE SYSTEM when satellite cannot be found or there is no signal?
If your Tevion Satellite TV System cannot find a satellite or shows no signal, try turning the antenna slightly to the left, waiting approximately 3 seconds, and repeating until both signal and quality are displayed. Alternatively, select a current channel from the preset channel list and then press the “INFO” key.
Why does my Tevion Satellite TV System have a poor image, blocking error, and sound stops?
If you are experiencing a poor image with blocking errors, small blocks forming, or the sound stops on your Tevion Satellite TV System, it could be that the antenna is not directed precisely towards the satellite. Try to direct the antenna more precisely. Alternatively, the LNB might be defective and need replacing.
What to do if the Tevion DIGITAL MINI SATELLITE SYSTEM Satellite TV System remote control does not work?
If the remote control for your Tevion Satellite TV System isn't working, first replace the batteries as they may be exhausted. If that doesn't work, ensure you are aiming the remote control towards the front side of the receiver and that there are no obstacles between the remote control and the receiver.
Why is there no sound or image on my Tevion DIGITAL MINI SATELLITE SYSTEM Satellite TV System, but receiver menus are displayed?
If your Tevion Satellite TV System displays receiver menus but has no sound or image, or a weak image color, make sure the antenna is correctly directed towards the satellite. Check the cable connection from the LNB to the receiver and from the receiver to the connected equipment. Also, ensure you have set the correct video format for the receiver.
What to do if red PWR LED is on, green STBY LED is off, and no image on Tevion DIGITAL MINI SATELLITE SYSTEM?
If the red PWR LED is on and the green STBY LED is off on your Tevion Satellite TV System, and the TV set does not display any image, check the connection of the Scart cable. Also, ensure the TV set is switched to the correct AV input.
How to fix Tevion DIGITAL MINI SATELLITE SYSTEM Satellite TV System crash (receiver cannot be operated)?
If your Tevion Satellite TV System crashes and the receiver cannot be operated, disconnect the receiver from the mains supply and then reconnect it after 10 seconds.
Why are the front panel LEDs dark on my Tevion Satellite TV System?
If the front panel LEDs on your Tevion Satellite TV System are dark, it means that the external power pack and/or the 12V cable are not connected. Connect the external power pack and/or the 12V cable to the mains supply and to the receiver.
Why is the reception of Sat1, Pro7, Vox, N24, DSF bad on my Tevion Satellite TV System?
If you are experiencing bad reception of channels like Sat1, Pro7, Vox, N24, and DSF on your Tevion Satellite TV System, it may be due to interference from a wireless telephone (DECT standard). Try placing your telephone in a different location.
What to do if channel on Tevion Satellite TV System has new frequency and is not transmitted?
If a channel on your Tevion Satellite TV System has received a new frequency and is no longer transmitted with the current data, delete the corresponding channel and perform an automatic scan.
Why is there no image or sound on my Tevion DIGITAL MINI SATELLITE SYSTEM Satellite TV System, even though the signal strength and quality are OK?
If your Tevion Satellite TV System has no image or sound, but the signal strength and signal quality are OK, the satellite antenna may be directed to the wrong satellite.
Provides helpline numbers for UK/N. Ireland and Republic of Ireland.
Details the front panel controls and indicators of the satellite receiver.
Identifies and describes the rear panel connections of the satellite receiver.
Illustrates the layout and numbering of buttons on the remote control.
Explains the function of each numbered item on the receiver's front panel.
Details the purpose of each connection port on the receiver's rear panel.
Explains the function of each numbered button on the remote control for operation.
Provides critical safety warnings regarding electrical connection and handling.
Advises on suitable placement, ventilation, and avoiding environmental hazards.
Details risks associated with wind load and provides a table of wind speed vs. antenna load.
Highlights advanced features like software updates, fast switching, and memory functions.
Provides a sequential guide for installing, connecting, and adjusting the satellite system.
Guides on unpacking and opening the antenna base for installation.
Explains how to tighten wing nuts to set the antenna's inclination angle.
Details the process of attaching the LNB to the LNB bracket using screws.
Instructs on drilling boreholes, countersinking, and fastening the base with screws.
Explains connecting the receiver via a coaxial cable and cautions about mains connection timing.
Provides detailed steps for stripping coaxial cable and installing F connectors.
Explains finding the correct direction using cardinal points and angles (azimuth, elevation).
Emphasizes clearing obstacles and provides an example for wall installation.
Guides on connecting the LNB cable and setting the horizontal azimuth angle.
Explains how to adjust the elevation angle using wing nuts.
Guides on opening the battery compartment and inserting batteries correctly.
Details connecting the receiver to power and TV, and its initial state.
Explains using the sat beeper and INFO key for signal quality feedback.
Guides on making fine adjustments to the elevation angle.
Instructs on slowly turning the antenna horizontally for optimal signal.
Advises on continuous signal checks and fine adjustments in vertical and horizontal directions.
Details how to navigate through the receiver's menus using the remote control.
Covers satellite selection, LNB type, 22K activation, DiSEqC, and Positioner settings.
Addresses issues like no signal, weak image, and suggests checking connections/direction.
Troubleshoots dark LEDs and no image issues related to AV mode.
Explains satellite orbits, signal requirements, and line-of-sight for alignment.
Guides on assembling the dish, ensuring correct cable connections, and powering up.
Details setting language, selecting Astra 28E, and using the INFO key.
Instructs on using a compass, satellite map, and setting initial dish elevation.
Guides on fine-tuning dish direction using audible signals and signal readings.
Outlines the 3-year warranty terms, conditions, and exclusions for the product.
General| Type | Satellite Receiver |
|---|---|
| Brand | Tevion |
| Model | DIGITAL MINI SATELLITE SYSTEM |
| Remote Control | Yes |
| Tuner | DVB-S |
| Supported Resolution | Standard Definition |
| Power Supply | AC Adapter |
