EasyManua.ls Logo

Tevo Zingo Move - User Manual

Tevo Zingo Move
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER
MANUAL
Your ZINGO MOVE warranty
must be registered online within
7 days of purchase.
To activate your warranty visit www.tevo.co.za, click the “Outdoor” tab,
then click the “ZINGO MOVE” icon, then click the “Register Your Warranty” link.
Fill in your details, enter the serial number (found near the charging port)
and agree to the terms and conditions.
move
move

Questions and Answers

  • J
    Joshua StokesAug 3, 2025
    Why has the performance of my Tevo hoverboards decreased?
    • B
      brookewangAug 4, 2025
      If the performance, range, or run time of your Tevo hoverboard (ZINGO MOVE) has significantly decreased, it may be due to several factors. First, check if the ZINGO MOVE is overloaded or if you are trying to use it on a hill that is too steep. Avoid using the ZINGO MOVE in off-road environments. Inspect the wheels for any obstructions. Finally, ensure that the battery is fully charged. If these steps don't resolve the issue, take ZINGO MOVE to a Tevo Service Centre to replace batteries.
  • O
    obrienjeremyAug 11, 2025
    What to do if my Tevo ZINGO MOVE hoverboards will not run?
    • V
      Valerie SimmonsAug 11, 2025
      If your Tevo hoverboard (ZINGO MOVE) will not run, first ensure that it is fully charged. Next, check all connectors to make sure they are properly connected. If charging, verify that the charger is correctly connected to the charging port and that the charger is receiving power.
  • R
    ruth06Aug 18, 2025
    What to do if Tevo hoverboards batteries are not charging?
    • D
      Diane BowersAug 18, 2025
      If the batteries of your Tevo hoverboard are not charging after use, clean and check both ends of the charger plug. Make sure they fit correctly and are not worn.
  • T
    Terry CampbellAug 26, 2025
    How to fix Tevo hoverboards charger light not working?
    • W
      William HarrisAug 26, 2025
      If the charger light for your Tevo hoverboard is not working, first check that the wall plug is plugged in correctly and that the power is on. Then, inspect the power cable for any breakages.

Summary

Service Centres

Riding Conditions and Appropriate Apparel

Familiarizing Yourself with Your ZINGO MOVE

How to Ride Your ZINGO MOVE

Charging Your ZINGO MOVE Battery

ZINGO MOVE Key Functions

Key: Switch Off Function

Turn off the ZINGO MOVE when not riding by pressing the power button.

Key: Locking and Unlocking

Lock the ZINGO MOVE for standby mode by pressing the lock button. Unlock by pressing again.

Key: Control Front Lights

Toggle front indicator lights on or off using the designated button while riding.

Key: Beginner and Advanced Modes

Select between beginner (limited speed) and advanced modes via the MODE button.

Key: Resetting the Device

Reset ZINGO MOVE to factory settings by pressing power and MODE buttons simultaneously.

Key: Balancing the Gyroscope

Re-balance the ZINGO MOVE's gyroscope by holding power and MODE buttons on a flat surface.

ZINGO MOVE Travelling Distance

Storing and Maintaining Your ZINGO MOVE

Trouble Shooting

Limited Warranty

Environmentally Friendly Disposal

Tevo Zingo Move Specifications

General IconGeneral
BrandTevo
ModelZingo Move
Categoryhoverboards
LanguageEnglish