Texas Instruments TI-99/4A - Page 190

MAKING CASSETTE BACKUP COPIES
Tomake a backup copy, you will have to load
the program into the computerfrom the original
cassette tape. Then you willunload (or SAVE)
the program onto a new, blank cassette tape.
Here's how you load the program into the
computer.
STEP1
Turn on the computer console and the TVset.
Plug the cassette recorder into both the wall and
the computer (see the instructions for setting up
a cassette recorder in Chapter 2).
STEP 2
Insert the cassette tape containing the program
you want to use into the recorder,face up. Close
the cover over the tape.
STEP 3
Type
OLDCS1
and press the ENTER key.
STEP 4
On the screen, you will see the following
message:
*REWIND CASSETTE TAPE CS1
THEN PRESS ENTER
189