Texas Instruments TI-99/4A - Page 194

STEP 4
On the screen, you will see the following
message:
*REWIND CASSETTE TAPE CS1
THEN PRESS ENTER
Push the REWIND button on your cassette
recorder. When the tape stops rewinding, press
the ENTER key on your computer console. This
brings a new command onto the screen.
STEP 5
The new command will be the following:
*PRESS CASSETTE RECORD CS1
THEN PRESS ENTER
Push the RECORD button on your cassette
recorder. Then press the ENTER key on your
computer console.
STEP 6
Now relax againiThe screen message will say
♦RECORDING
This message may stay on the screen for as
long as five minutes. When the program has
been SAVED, another message will appear
on the screen:
*PRESS CASSETTE STOP CS1
THEN PRESS ENTER
193