Texas Instruments TI-99/4A - Page 193

If *l/0 ERROR 56 appeared, check the cable
connecting the cassette recorder to the com
puter console. Then go back to STEP 3.
The program is now loaded into your com
puter's memory. Youwill use thesesame seven
steps to load any program from your cassette
recorder into your computer, whether you are
making a copyof the program or running it.
To complete the making of the backup copy,
follow these eleven steps to SAVE (unload)
your program onto a cassette tape.
STEP1
Remove the tape whichyou have just loaded
into the computer from the cassette recorder.
STEP 2
Insert a new, blank tape into the recorder and
close the coverover the tape.
STEP 3
Type
SAVECS1
and press the ENTERkey.
192