TI.GRAPH LINK for the TI.83 Plus (Windows) 3
W83P-USA.DOC TI-83 Plus, Euro version, Engish Bob Fedorisko Revised: 12/09/99 3:52 PM Printed: 12/17/99
12:28 PM Page 3 of 14
The personal computer used to run TI-GRAPH LINK for
Windows must meet the following hardware and software
requirements:
Windows/Macintosh (Gray Cable)
¦ Microsoft Windows version 3.1 or later.
¦ MS-DOSê operating system version 3.1 or later
(MS-DOS version 5.0 or later recommended).
¦ 486 PC or better with 8 MB available RAM.
¦ CD-ROM drive and one 3½-inch diskette drive.
¦ 256 color VGA.
¦ Hard disk with 1.5 MB available storage space.
¦ An available serial communication port configured as
Com Port1, Com Port 2, Com Port 3, or Com Port 4.
Windows Only (Black Cable)
¦áSame as above plus 486 PC or better with 8 MB
available RAM (Windows 95/98); 16 MB available RAM
(Windows NT).
The instructional package includes the following cable and
adapter:
¦ One gray TI-GRAPH LINK cable that connects to a TI-83
Plus and IBM-compatible computer.
¦ One 25-pin to 9-pin adapter.
The retail package includes the following cables:
¦ One black TI-GRAPH LINK cable that connects to an
IBM-compatible computer.
¦ One unit-to-unit cable.
Getting Started with TI
.
GRAPH LINK for Windows
System
Requirements
Cable and
Adapters
To Next Page
Loading...
