Texas Pneumatic Tools TX1B User Manual

www.airtools.com Email: tptinfo@airtools.com
Service, Operation and Parts Manual
~
Made in U.S.A.
~
TEXAS
1-800-231-9740
254-587-2533 (Int’l calls)
VIRGINIA
1-800-626-1091
NEVADA
1-800-858-1222
SAFETY RETAINER TYPE SCALERS
TX1B
T O O L
S P E C I F I C A T I O N S
PART # WEIGHT SHIPPING WT.
BOX OF 6
LENGTH CFM
CONSUMED
BORE STROKE BPM INLET MINIMUM
HOSE SIZE
TX1B-LTCS
4 lbs. 30 lb. 3 oz. 15” w/ chisel 12 CFM 1” 1-1/8” 4600 1/4”NPT 3/8”
TX1B-LTNS
6 lbs. 40 lbs. 17” w/ 5” needles 12 CFM 1” 1-1/8” 4600 1/4”NPT 3/8”
STANDARD WELD FLUX SCALERS: Model TX1B
STANDARD EQUIPMENT: With Needle Scaler:
With Weld Flux Scaler:
1 set 5” Scaler Needles
1 - 7” Flat Chisel
DESCRIPTIVE SUFFIXES FOLLOWING “B” TO FURTHER DESCRIBE TOOL:
LT = Lever Throttle PT = Push Type Throttle NS = Needle Scaler CS = Chisel Scaler

Texas Pneumatic Tools TX1B Specifications

General

Brand	Texas Pneumatic Tools
Model	TX1B
Category	Media Converter
Language	English

Summary

TX1B Safety Retainer Type Scalers

Tool Specifications

Specifications for TX1B models including part number, weight, length, CFM, bore, stroke, BPM, and hose size.

Push Throttle Backhead Assembly

Diagram and parts list for the push throttle backhead assembly of the TX1B scaler.

Lever Throttle Backhead Assembly

Diagram and parts list for the lever throttle backhead assembly of the TX1B scaler.

Tool Components and Accessories

Detailed breakdown of TX1B scaler parts including nose, cylinder sleeve, retainer, needles, and chisels.

Service and Operations

Air Supply Requirements

Details on required air pressure, quality, and hose specifications for optimal tool performance.

Lubrication Guidelines

Recommendations for lubricating the tool, including oil types and preventative maintenance flushing.

Preparing for Operation and Disassembly

Instructions on converting the tool, checking assembly, and disassembling for maintenance or repair.