Texi Apollo 68 / Texi Apollo 10124
EN
• Connect one side of the cord to the back of iron and another one to outlet.
• Make sure that earth-connection is in good working order for your security.
• After plugging in, press main ON/FF key.
• Display screen Red light ring shows that heated sheet is warming up and steam
generator working.
When you turn iron on ,the temperature value will rise(the heating element work),
and stop after the temperature reaches the degree selected by cloth type selected
(the heating element stop).
The quality of press depends relatively on the number of the times you use steam
and also suitable temperature. Labels on clothes show their suitable temperature
for ironing by using the below international signs. Select these type of cloth with
respect to the label of what you want to iron.
NOTE! When you select the type of cloth, the cloth type light continual ashing ,the
heating element work, after the temperature reach, the light will stop ashing .
Type of Cloth Thermostat Setting Amount of Steam
Nylon 65°C Dry or very little steam
Silk 110°C A little steam
Wool 140°C A little steam
Cotton 160°C Maximum Steam
Linen 180°C Maximum Steam
PLUGGING IRON PRESS IN
CONTROL OF TEMPERATURE
SELECTION OF SUITABLE TEMPERATURE
Caution!
• Never try to use steam when tank is empty as it hurts pump.
• Never ll tank with hot water.
• Never add the materials containing alcohol, fragrant essences and so on to water.
PREPARATION
To Next Page
Loading...
Need help?
General
