EN
7
8
9
10
11
7. Put the down holding clamp into
stainless steel pole, the hight is
optionally adjust by yourself, then
close lock catch. Down holding
clamp ‘s direction can be 360 degree
revolve,while you don’t want to use can
turn to as stainless steel pole line, (see
pic.7).
8. Take out water jug, open the lid, ll
clean water into the jug. Then close the
lid tightly. Note: Only cold water can be
lled. Do not use hot water. To prolong
garment steamer’s service life, puried
water is preferred (see pic. 8).
9. Setzen Sie den Wasserbehälter nach
seinem Befüllen mit Wasser an seine
ursprüngliche Position ein (siehe Abb. 9).
10. Insert power line to the ac 220V-240V
socket, (see pic. 10).
11. Press button
on the power switch.
Iron will start working automatically and
steam will be released within 60
seconds. Selecting steam volume, press
the
button. ( see pic. 11)
Texi Master Plus 33
To Next Page
Loading...
Need help?
General