Texsport 01082 User Manual (English)

To Next Page

INSTRUCTIONS

Item 01082

Deluxe Camp Shower/Shelter Combo

Thank you for purchasing this Texsport shower/shelter. Please read and understand each step of the set-up instructions. We encourage you to set-

up this shower/shelter at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We

hope you enjoy your new shower/shelter and that it will give you many years of camping pleasure.

Do not apply excessive force to this product.

PARTS LIST:

A......1 Shower/shelter skin

B......2 Towel holder poles

C......4 Leg poles

D......4 Curved roof poles

E......4 Eave poles

F......1 Molded roof joint

G......4 Molded corner joints

H......Solar shower

I......Stakes, clews, and guy rope

J......Towel holder straps

K......Removable floor

NOTE:

Prepare your camp site by removing all sharp stones,

twigs, etc. The site should be flat and have no depres-

sions that could collect rain water.

NOTE: ALL FRAME POLES HAVE A

LOCKING TAB. LINE UP THE TAB

AND SLOT ON EACH POLE FOR A

SECURE FIT.

STEP 1 - Assemble the curved roof

poles (D) and insert each one into

the molded roof joint (F).

STEP 2 - Make sure all curved roof

poles are secure as shown above.

STEP 3 - Insert the curved roof

poles into the molded corner joints

(G).

STEP 4 - Assemble the eave poles

(E) and insert each one into the

molded corner joint.

STEP 5 - Make sure all poles have

snapped into their locking tab for

a secure fit as shown above.

01082 Instructions 9-12_Layout 1 10/20/12 1:07 PM Page 1

Need help?

Do you have a question about the Texsport 01082 and is the answer not in the manual?

Texsport 01082 Specifications

General

Product Name	Texsport 01082
Category	Camping Equipment
Type	Tent
Material	Polyester
Floor Material	Polyethylene
Color	Blue
Closure Type	Zipper
Fill Material	Not Applicable
Frame	Fiberglass

Summary

Shower/Shelter Assembly

Assemble Roof Frame

Assemble and secure curved roof poles into the main roof joint and corner joints.

Assemble Leg Poles

Assemble leg poles and insert them into the molded corner joints to form the frame.

Attach Shelter Skin and Fly

Spread the shelter skin, attach it to the frame, and drape the fly over the shelter.

Secure Shelter with Guy Ropes

Use guy ropes to secure the shelter, tying them to fly loops and staking them.

Additional Setup and Features

Adjust Tension and Attach Accessories

Adjust guy rope tension and attach towel holder straps and poles.

Hang Camp Shower and Caddy

Hook the camp shower and attach the shower caddy using provided toggles.

Attach Removable Floor

Clip the removable floor to the bottom web loops of the shelter.

Important Information and Care

Safety Warnings and Usage

Advisories on flame retardancy, camp site preparation, and avoiding excessive force.

Stake Recommendations

Guidance on using appropriate stakes for different soil conditions.

Zipper Care

Instructions on lubricating zippers and avoiding damage from sand or force.

Storage and Washing

Guidelines for dry storage, hand washing with mild soap, and seam sealing.

Shelter Lifespan and Repair

Factors affecting nylon shelter life and recommendations for minor tear repair.

Customer Support

Contact information for questions, problems, or comments regarding the product.