BHT-206A/B-SERIES-MM-1
5-00-00
Page 154 Rev. 14 30 APR 2013
Export Classification C, ECCN EAR99
If a nut is improperly torqued, remove and check tare
torque, and replace as required. Recheck torque at
next 100 hours.
2. Check transmission top case stud nuts for torque 50 to
70 inch-pounds (6 to 8 Nm).
BHT-ALL-SPM 3. Touch up paint finish as required.
5-50. 100 HOURS AFTER EACH INSTALLATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...