Instruction manual EHP 3 page 15
____________________________________________________________________________
We recommend to have the service done in specialised companies where the save disposal
of the oil is guaranteed for environmental protection.
Attention
Please use only clean, proper hydraulic oil.
(Shell Tellus T 15 and other hydraulic oils of similar quality)
Attention
Hydraulic oils can cause cutaneous eruption (eczema) or other health hazards.
Avoid longer skin contact. Wash your hands carefully after each contact.
Attention
Spilled hydraulic oil has to be absorbed immediately.
The following hydraulic oils with the viscosity class VG 15 and the quality level HLP are
suitable for a temperature range -20°C to +40°C:
AVIA HVI 15, Shell Tellus T 15, Mobil DTE 11, NUTO H 15, Rando HD - Z15,
Agip OSO 15, BP Energol HLP 15.
5.5. Reference as to which spare parts can be exchanged by the customers
Within the determined use of the tool the user may only change the oil.
Attention
Do not damage the seals of the pump.
Do not attempt to repair the tool yourself, and do not remove any parts such as screws and
other components.
5.6. Storage and transport of the pump
In order to protect the pump unit against damages it has to be cleaned carefully after heavy
duty operations.
The hydraulic pump is supplied with a carrying handle. The hydraulic hose (Pos.-No. 8) is
the most vulnerable part of the pump and has to be handled with care. The minimum
bending radius should not be lower than 70 mm.
To Next Page
Loading...