MANUAL SETTINGS:
The following manual settings can be done in the setting mode:
Time zone
Time reception DCF ON/OFF
Manual time
Press and hold the SET key for about 3 seconds to advance to the setting
mode:
TIME ZONE SETTING:
The time zone default is "0" hour. To set a different time zone:
1. The current time zone value starts flashing.
2. Use the + key to set the time zone. The range runs from 0, -1, -2…
-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Time reception On/Off setting.
TIME RECEPTION ON/OFF SETTING
In area where reception of the radio-controlled time (DCF time) is not possible,
the time reception function can be turned OFF. The clock will then work as a
normal Quartz clock. (Default setting is ON).
1. The digit “ON” digit will start flashing on the LCD.
2. Use the + key to turn OFF the time reception function if necessary.
3. Confirm with the SET key and enter the Manual time setting.
Note:
If the Time Reception function is turned OFF manually, the clock will not
attempt any reception of the radio-controlled time (DCF time) as long as the
To Next Page
Loading...
