2726
Digital timer and stopwatch
• Confirm the setting with the M1 button.
• Press M1 button to recall the preset time.
• Push the MIN and SEC button at the same time to reset the timer.
• Set the time for M2 and M3 in the same way.
7.3 Stopwatch
• Push the MIN and SEC button at the same time to reset the timer.
• Push the S/S button to start the count up-process. ▲ appears in the dis-
play.
• Use the S/S button to stop and restart the counting.
7.4 Setting of alarm sound
• With the switch at the right side set the volume for the alarm.
Hi: high
Digital timer and stopwatch
Lo: low
Mute
• The marking in the middle of the switch shows the selected volume.
7.5 Fixing
• With the foldable leg the instrument can be placed onto flat surfaces.
• With the foldable suspension device you can fix the instrument with a nail
at the wall.
• Use the two magnets at the back of the instrument for placement on metal
surfaces.
8. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring agents.
Protect it from moisture.
TFA_No. 38.2024_Anleit_04_21 25.04.2021 17:47 Uhr Seite 14
To Next Page
Loading...
