8
Tiller lock
The scooter has a tiller lock function, press and twist the tiller lock button to lock the tiller, see Fig. 4.1.1. Twist the
button anti-clockwise to unlock the tiller, see Fig. 4.1.2. This is only to be used when the scooter is dismantled,
either for transportation, or storage.
Fig. 4.1.1 Locking mode Fig. 4.1.2 Unlocking mode
Parts
You can disassemble the scooter into five pieces: the seat, the front section, the basket, the battery pack, and the
rear section.
1. Place the scooter in an area where you have sufficient space to move the parts around. You may need
assistance to lift some of the scooter components.
2. See “Specifications” for individual component weights.
3. No tools are required to disassemble or assemble your scooter. Always disassemble or assemble your
scooter on a level, dry surface with sufficient space for you to work and move around your scooter. Keep
in mind that the disassembled sections of the scooter take up more floor space than the assembled
scooter.
To Next Page
Loading...
