9
FOLDING & UNFOLDING YOUR SCOOTER
Folding
To fold your scooter in order to put it into a car boot or stand it up and store it follow these 4
simple steps:
1. Place one hand on your scooters seat base and use the other to pull up on the red handle
located at the back of the floor pan just in front of the battery pack until you hear a click.
2. Remove the seat (see Adjusting Your Seat).
3. Use one hand to push the seat base down towards the floor pan and the other to move the tiller
towards the seat which will lift the front wheels off the floor and fold your scooter.
4. Finally push the tiller against the seat and the front of the floor pan towards the rear wheels to
ensure your scooter is locked into the folded position.
Once folded you can then lift your scooter using the handle at the rear and stand it on its front
wheels to move around in the folded position.
Unfolding
To unfold your scooter follow these 3 simple steps:
1. Pull the red handle on the left hand side of your scooter towards you until you feel it click.
2. Pull the tiller away from the floor pan until the front wheels of your scooter touch the floor.
3. Ensure your scooter is locked in the unfolded position by pulling the seat away from the floor
pan with one hand and pushing the tiller away from the seat with the other until you hear a click
To Next Page
Loading...
