TGB X-MOTION 250 User Manual

DEAR USERS :
WE WOULD LIKE TO INFORM YOU THAT UNDER OUR STRICT QUALITY CONTROL
SYSTEM FOR THE PRODUCTION OF OUR SCOOTERS, WE OFFER A COMPLETE
GUARANTEE AS INDICATED IN THE GUARANTEE BOOKLET ISSUED BY OUR TGB
DEALER. OUR SCOOTER MUST UNDERGO ALL PERIODIC MAINTENANCE AND
SERVICES BESIDES, ORIGINAL SPARE PARTS MUST BE USED. IN CASE OF DEFECTS IN
STRUCTURE OR PART MATERIALS PRODUCED, ASSISTANCE IS OFFERED AT FREE OF
CHARGE UNDER VALID WARRANTY. THE ABOVE-MENTIONED GUARANTEE IS NOT
VALID UNDER THE FOLLOWING CONDITIONS:
 THE DESIGNATED LUBRICATING OIL IS NOT USED.
 MAINTENANCE OR REPAIR IS NOT CARRIED OUT IN THE APPROPRIATE MANNER.
 UNGUARANTEED PARTS ARE UTILIZED AND MODIFICATIONS TO THE ORIGINAL
DESIGN ARE CARRIED OUT.
 INSTRUCTIONS IN THE OWNER‘S MANUAL ARE NOT PROPERLY FOLLOWED.
 PARTS SUBJECT TO NORMAL WEAR SUCH AS THE SEAT, SPARK PLUGS, ELECTRIC
BULBS AND CABLES.... ETC.,ARE NOT COVERED BY GUARANTEE.
THIS MANUAL IS A GUIDE FOR THE OPERATION INSPECTION AND BASIC MAINTENANCE
OF THIS SCOOTER. IF YOU HAVE ANY FURTHER QUERIES PLEASE CONTACT THE TGB
DEALER, WHO WILL BE READY TO HELP YOU OUT AT ALL TIMES.
WARNING:
PLEASE USE SAE 10W-40 API SH/CE OR SG/CC GRADE LUBRICANT OIL TO REFILL
THE ENGINE, OTHERWISE, THE ABOVE MENTIONED GUARANTEE IS NOT VALID.

TGB X-MOTION 250 Specifications

General

Brand	TGB
Model	X-MOTION 250
Category	Motorcycle
Language	English

Summary

General Warning and Guarantee Information

Engine Oil Requirement for Warranty

Mandatory use of SAE 10W-40 API SH/CE or SG/CC grade lubricant oil for engine refill.

Safe Riding Practices

Exhaust Pipe Burn Hazard Warning

Cautionary note regarding the hot exhaust pipe and potential burns.

Component Operation: Ignition Switch

Ignition Switch Positions

Explanation of Start, Stop, OPEN, and Steering Handle Lock positions.

Ignition Switch Safety Precautions

Component Operation: Starting and Signaling

Electrical Starter Button Use

How to use the starter button for engine ignition, including safety interlocks.

Braking System Operation

Braking Techniques and Safety

Guidance on proper braking, using both brakes, and avoiding sudden stops.

Engine Starting Procedures

Pre-Start Checks and Safety

Checks for oil, fuel, and brake application before starting the engine.

Starter Button and Throttle Use

Driving Off and Parking

Parking Method and Theft Prevention

Detailed steps for parking securely and locking the steering.

Pre-Ride Inspection: Fluids and Components

Routine Inspection Checklist

Checklist for engine oil, fuel, brakes, tires, and general component tightness.

Engine Oil Inspection and Change

Procedure for checking oil level, changing oil, and recommended oil types.

Pre-Ride Inspection: Fuel and Transmission

Fuel Inspection and Refueling Safety

Transmission Oil Check and Replacement

Procedure for checking and changing transmission oil, including recommended type.

Pre-Ride Inspection: Brakes

Brake Lever Free Play Adjustment

How to check and adjust the play in the brake levers.

Disk Brake Line Inspection

Pre-Ride Inspection: Brakes and Throttle

Front Brake Pad and Fluid Check

Checking front brake pad wear and inspecting/replenishing brake fluid.

Throttle Cable Clearance Adjustment

Pre-Ride Inspection: Battery and Tires

Battery Terminal Cleaning

How to clean battery terminals and care for maintenance-free batteries.

Tire Inspection and Pressure Check

Checking tire condition, tread, and inflating to correct pressure.

Front Shock Absorber Check

Pre-Ride Inspection: Suspension, Fuses, and Signals

Fuse Check and Replacement

Procedure for checking fuses, replacing blown ones, and locating the fuse box.

Turn Signal Lights and Horn Test

Pre-Ride Inspection: Lights, Fuel, and Spark Plug

Lights Check (Head, Brake)

Fuel Leakage and Lubrication Check

Inspecting fuel system for leaks and checking body mechanism lubrication.

Spark Plug Inspection and Gap

Procedure for inspecting, cleaning, and gapping the spark plug.

Cooling System Inspection

Coolant Level Check

How to check the coolant level in the reserved tank and for leaks.

Coolant Replenishment Procedure

Engine Maintenance: Ventilation and Air Cleaner

Air Cleaner Element Service

Instructions for checking, cleaning, and replacing the air cleaner element.

Troubleshooting and System Information

Engine Start Failure Diagnosis

Step-by-step checks for diagnosing why the engine may not start.

Riding Cautions and Safety Guidelines

Pre-Ride and Starting Cautions

Braking and Turning Safety

Risks of sudden braking/turning and precautions for wet roads.

Periodical Maintenance Schedule

Maintenance Interval Table

Table detailing maintenance items and their required intervals.

Vehicle Specifications (125cc Model)

Engine, Ignition, and Transmission Specs

Vehicle Specifications (250cc Model)

Engine, Ignition, and Transmission Specs (250cc)