To Next PageTo Next Page
Need help?Do you have a question about the Thaler KE-SP 3050 and is the answer not in the manual?
Cable Pulling Winch Description
Manufacturer and Distributor Information
CE Certification Status
Intended Application and Design
Winch Use and Operation Range
Operator Station Safety Requirements
Winch Technical Specifications
Detailed Product Description
Instructions on how to safely attach the winch trailer to a towing vehicle.
Mentions adherence to local traffic laws for transport.
Details the process of connecting the trailer hitch.
Step-by-step guide for coupling the winch trailer to the tow vehicle.
Guidelines for safely driving with the winch attached.
Specific advice for forward movement and visibility.
Procedures for safely disconnecting the winch from the tow vehicle.
Instructions for manual movement and warnings.
Procedures and safety for tire maintenance.
Details on tightening wheel nuts and checking tire pressure.
Explains the function and adjustment of rear supports.
Details on operating the hydraulic boom, including raising, lowering, and securing.
Identifies and explains the function of various control panel elements.
Explains the ignition switch functions and starting procedures.
Describes the meaning of red and green control lights.
Details the function and proper use of the emergency stop button.
How to use the throttle lever and remote control for operation.
Information on connecting the remote control tether.
Overview of the KPR 2000 system and its functions.
Instructions for operating the KPR 2000 power switch.
Explains the function of the hour meter for maintenance tracking.
Explains the alternator and oil check indicator lights.
Details the engine temperature and preheat indicator lights.
Describes the fuel gauge and beacon on/off switch.
Details the card recorder for the KPR 2000 system.
Explains the function of the hydraulic lever for boom control.
General safety and preparation steps before maintenance.
Outlines daily and periodic maintenance tasks.
Procedures for checking and changing hydraulic oil and filters.
How to check the hydraulic oil level.
Maintenance of the hydraulic tank breather filter.
Steps for changing the hydraulic oil.
Guidelines for changing filter elements.
Daily and monthly checks for the winch.
Schedule and procedure for greasing the winch.
Criteria for inspecting and replacing the wire rope.
Maintenance for drive chains and chain wheels.
Pre-operation checks for controls.
Refers to a separate manual for engine maintenance.
Refers to the Yanmar manual for diesel engine troubleshooting.
Refers to the AL-KO manual for trailer brake issues.
Details what the manufacturer's warranty covers.
Outlines the conditions for warranty validity.
Lists circumstances that void the warranty.
Specifies items not covered by the warranty.
General