Need help?Do you have a question about the Thane Fitness BikeNook and is the answer not in the manual?
Expresses gratitude for purchasing the Bike Nook stand and highlights its benefits.
Lists all the components included with the Bike Nook bicycle stand.
Align arrows on L-Piece and Cross Bar for correct orientation before connecting.
Insert and tighten Flathead Bolt into the L-Piece using the Allen Key.
Place Cross Bar on feet, insert Long Bolt into L-Piece bottom hole.
Add washer and nut to Long Bolt, secure with Socket Wrench and Allen Key.
Place Track on L-Piece, aligning holes on Track with L-Piece holes.
Align Diamond Bracket holes with Track and L-Piece holes.
Use bolts, washers, and nuts to secure L-Piece, Track, and Diamond Bracket.
Place Upright between Diamond Bracket and L-Piece gap.
Ensure holes of Diamond Bracket, Upright, and L-Piece are aligned.
Insert bolts into remaining L-Piece holes, securing with nuts and washers.
Align Adjustable Upright with Upright to set desired height.
Place Adjustment Knob through Adjustable Upright holes and secure.
Position rear wheel of the bicycle facing the Bike Nook stand.
Roll bike onto Ramp and Track until wheel engages Upright.
Lift the front wheel upwards to prepare for vertical storage.
Lower seat holder onto V-Slot, ensuring stability and proper weight lean.
Use the provided strap to secure the front wheel in place.
General| Type | Exercise Bike |
|---|---|
| Foldable | Yes |
| Adjustable Seat | Yes |
| Resistance Type | Magnetic |
| Display Type | LCD |
| Number of Resistance Levels | 8 |
| Material | Steel |
To Next Page