The H2O e3™ Natural Cleaning System is an innovative device designed for effective, economical, and eco-friendly cleaning, sanitizing, and deodorizing using electrolyzed water, referred to as S-Water™. This system transforms ordinary tap/drinking water and common table salt into a powerful cleaning solution through electrolysis, eliminating the need for harsh chemical cleaners.
Function Description:
The core of the H2O e3™ system is the eActivator, which uses electricity to break down water (H2O) and dissolved table salt (sodium chloride, NaCl) molecules. This process creates new molecules, primarily hypochlorous acid (HClO) and hypochlorite ion (-OCl), which are known sanitizing, bacteria-killing, and deodorizing agents (oxidants). Sodium hydroxide (NaOH), also produced, acts as a detergent and optimizes the cleaning action. The S-Water™ generated is in the neutral/mildly alkaline range, providing effective cleaning and antibacterial properties. For an even stronger antibacterial effect, white vinegar can be added after the electrolysis process to lower the pH and increase acidity. The oxidants work by breaking down and eliminating dirt, bacteria, and odors.
Important Technical Specifications:
- Power Input: The adapter requires an input of 100-240V~50/60Hz.
- Power Output: The adapter provides an output of 5V/1A.
- eActivator Capacity: The eActivator holds 450ml of water.
- Salt Measurement: One provided spoon of salt equals 3g.
- Electrolysis Time: The electrolysis process is preprogrammed to run for 10 minutes and stops automatically.
- S-Water™ Effectiveness: Generated S-Water™ (with or without vinegar) remains effective for 1-2 weeks; its effectiveness significantly decreases after this period.
- Operating Temperature: The device should not be used in frost or temperatures above 50°C/122°F or in humid or wet locations.
Usage Features:
The H2O e3™ Natural Cleaning System offers versatile cleaning options for various household surfaces.
-
S-Water™ Generation:
- Fill the eActivator with 450ml of regular tap/drinking water.
- Add one spoon (3g) of regular table salt.
- Close the eActivator cover and shake for a few seconds until all salt is dissolved.
- Place the eActivator on a level surface.
- Plug the adapter into the eActivator and press the ON/OFF button. The red indicator light signals the start of the 10-minute electrolysis process.
- Once complete, the indicator light turns green, indicating S-Water™ is ready.
- Optional: For enhanced antibacterial effect, add one spoon (0.21ml) of white vinegar to the eActivator after electrolysis and shake to mix.
- Safety Note: Do not use hot or boiling water to make S-Water™, and do not heat or boil the finished S-Water™. Do not drink S-Water™. Do not mix S-Water™ with ammonia products, acidic toilet bowl cleaners, or any other cleaners, as this can produce toxic fumes. Only use regular table salt and white vinegar; other salts (e.g., Epsom salts) will not yield effective S-Water™.
-
Floor Cleaning/Mop Use (with eMop Head):
- Assemble the eMop Head onto the eActivator Holder.
- Connect the two aluminum pipes, ensuring the buckle clicks securely into the buckle hole.
- Insert the eActivator into the eActivator Holder and turn the locking mechanism to secure it.
- Place the Double-sided Coral and Microfiber eMop Cloth onto the eMop Head.
- Press the trigger to spray S-Water™ from the eMop Nozzle onto the floor.
- The eMop Nozzle can be turned in either direction to choose between a more concentrated or wide spray mode.
- Caution: Do not use the H2O e3™ Natural Cleaning System on unsealed wood floors, carpet, leather, clothing, or any other fabric or soft materials, as continuous use may cause discoloration or fading. S-Water™ might cause corrosion or damage on unprotected, corrosion-prone metals; wipe them off after application.
-
Spray Bottle Use (with eSprayer Nozzle):
- Place the eSprayer Nozzle onto the eActivator.
- The eSprayer Nozzle Head can be turned in either direction to select a more concentrated or wide spray mode, suitable for various surfaces.
Maintenance Features:
Regular cleaning and maintenance ensure the longevity and effectiveness of the H2O e3™ system.
- eMop Cloths: The Double-sided eMop Cloths are machine washable or can be rinsed under tap water. Always ensure they are completely dry before next use.
- eMop Cleaning: The H2O e3™ eMop can be cleaned with a damp cloth.
- eActivator Cleaning (Limescale Removal):
- To clean the inside of the eActivator, place approximately 50ml of vinegar and 200ml of water into it.
- Close the eActivator cap and shake the contents.
- Let the water/vinegar solution sit inside for 20-30 minutes.
- Empty the eActivator, rinse thoroughly with regular tap water, and then use new water for the next batch of S-Water™.
- Repeat the process or extend the soaking time if necessary until limescale is completely removed from the metal mesh. More frequent cleaning is recommended in areas with hard water.
- If making multiple batches consecutively or running electrolysis for more than 15-20 minutes, add vinegar to the water tank after use, shake it, and soak the metal electrolysis net for about 3 minutes. Rinse thoroughly with regular tap water afterward.
- Leakage Prevention: After filling the eActivator with water, ensure:
- The eActivator cap is sealed properly and twisted on tight.
- The eActivator base is fixed properly onto the eActivator water tank.
- The Valve Cap Assembly on the eActivator is sealed.
Safety and Disposal:
- Always unplug the eActivator when cleaning or performing maintenance.
- Keep the appliance and its cord out of reach of children under 8 years old. Children aged 8 and above, or persons with reduced capabilities, can use the appliance only with supervision and instruction.
- Do not use the appliance with a damaged cord or adapter. Return it to the distributor if damaged.
- This product should not be disposed of with general household waste in the EU. It should be recycled responsibly to promote sustainable reuse of material resources. Contact the retailer or collection systems for environmentally safe recycling.
Need help?
General
To Next Page
