Need help?Do you have a question about the THARMAC Cellspin II and is the answer not in the manual?
Covers safe installation, operation, material handling, and environmental restrictions for the centrifuge.
Ensures operation by trained staff and adherence to legal and professional safety regulations.
Procedures for centrifuging hazardous materials, including bio-safety systems and containment.
Guidelines for using approved parts, authorized repairs, and compliance with electrical safety standards.
A rotary knob used for setting individual parameters by turning clockwise or anticlockwise.
Keys for selecting parameters, starting/stopping runs, and accessing special functions like emergency stop.
Instructions for entering new programs or modifying existing ones through the control panel.
Procedure for selecting and displaying stored centrifugation programs.
Details on starting and performing a centrifugation run with a defined duration.
How to operate the centrifuge in continuous run mode without a set time limit.
Instructions for performing brief centrifugation runs by holding down the start button.
How the centrifuge maintains a set temperature when the rotor is at rest and the lid is closed.
Procedure for cooling the rotor to a specific temperature before a centrifugation run.
Instructions for cleaning the centrifuge housing, lid, and centrifuging chamber with appropriate agents.
Procedures for disinfecting the centrifugal chamber when contaminated with infectious materials.
Steps for safely removing radioactive contaminants from the centrifuge and accessories.
Guidelines for cleaning, inspecting, and maintaining rotors and accessories for optimal performance and safety.
Methods for disinfecting rotors and accessories, including precautions for specific materials.
Instructions for autoclaving compatible centrifuge accessories at specific temperatures and durations.
Procedures for dealing with broken centrifuge containers and glass splitters.
Procedures for disinfecting reusable Cellfunnel®, ECOfunnel®, and CellClips after use.
Instructions for cleaning and disinfecting the closed CellClip-rotor and its seal.
Guidelines for the safe disposal of single-use filter cards due to potential contamination.
Guidelines for processing various body fluids, including urine, cysts, and cerebrospinal fluid.
Methods for processing cytological samples from gynecological, urological, and internal medicine examinations.
Procedures for processing cell cultures and pathology samples for cytocentrifugation.
Guidance on optimal sample liquid volumes for different preparation systems.
Recommendations on cell concentration and dilution for achieving desired results.
Information on recommended centrifugation speeds, times, and acceleration for various sample types.
Troubleshooting steps when no cells are obtained after centrifugation, addressing blocked filter cards or preparation issues.
Guidance on detecting abnormal cells, which may settle at the bottom and require resuspension.
Solutions for obtaining too few cells, including issues with dilution, sample volume, or slide placement.
Advice for managing situations where too many cells are obtained, including dilution recommendations.
Troubleshooting cell movement and adhesion problems, addressing fixation and suspension medium evaporation.
Addressing issues with cell band formation, including cell thickness, border dryness, and suspension medium.
List of articles including reusable and disposable Cellfunnels®, filter cards, and Cytoslides for single preparation systems.
List of articles including reusable and disposable Double Cellfunnels®, filter cards, and Cytoslides.
Details on reusable and disposable ECOfunnels®, ECO-slides, and ECO-seals compatible with the system.
List of EASY series consumables, including filter cards and disposable sample chambers.
General| Brand | THARMAC |
|---|---|
| Model | Cellspin II |
| Category | Laboratory Equipment |
| Language | English |
To Next Page